Our Bearing Selector
Click here to find your bearingGo to Selector ›
Our WMG range of plastic bearings can be used across a wide range of applications and industries.
These thermoplastic bearings are suitable for applications requiring high abrasion resistance in atmospheres where dust or other particles are a constant problem. Our WMG range has a very low level of dynamic friction and almost zero stick slip characteristics.
We can also offer bearings manufactured in many different types of plastic material to suit various applications and can be machined or moulded depending on quantities required.
For fitting information, please refer to the必发指数.
|Structure||PA66 nylon with fibres and PTFE|
|PV – Dry (N/mm² x m/s)||0.4 max|
|Static load (N/mm²)||80 max|
|Sliding speed (m/s)||1.0 max|
|Intermittent temperature (°C)||-70 to 200|
|Operating temperature (°C)||-40 to 150|
|Thermal Conductivity (W/mk)||0.2|
|Coefficient of friction – Dry||0.08 to 0.2|
|Hardness (rockwell) (HRR)||107 min|
|Hardness (Shore D)||80 min|
|Tensile strength (N/mm²)||60 min|
|Compressive strength (N/mm²)||100 min|
|E-module (N/mm²)||1500 min|
|Static pressure of surface at 20 degrees (N/mm²)||100 min|